FAQ from clients who buy timber pelletizerl

FAQ from  clients who buy  timber pelletizer machine

( 1)  Just how to make the mold life  much longer?

With the  constant introduction of wood pelletizer maker  right into the market, the development of mechanical tools is also  continuously  altering. The  damage of the  mold and mildew during the  manufacturing of  timber pellets is  additionally a major  price. So,  exactly how to maintain it  straight  impacts the service life of the  timber pellet making  device. Therefore, it  additionally directly  impacts the  handling  price of wood pellets.  Exactly how to make the mold life of the  timber pelletizer  maker  maker longer?  Obtain your  solution today!

Related post： wood pellet plants 

①  On a regular basis clean oil  and also fill

If the wood pelletizer machine is not used for a month, it is  suggested to clean the oil inside, so the oil will  slowly harden  throughout long-term storage, which  will certainly make it  tough to remove the  following time it is used, which will seriously  impact the  succeeding  use the  mold and mildew of  timber pelletizer  maker.

 After the pellets are  refined, it is  needed to  make use of oil to grind for a  time period to ensure that all the oil  continues to be in the die hole, which is of great  advantage to the  job the next day and is  likewise  for the  long-lasting  use the die. The oil can be mixed with waste engine oil and wood chips. It can be made once  as well as can be recycled.

② No  demand to  clean up the  mold and mildew for a  long period of time

If the mold and pinch rollers are  no more used for a long time, it is  advised to  eliminate the  mold and mildew after cleaning  and also  storage space. The master  cleans up the sawdust pellets inside the mould  as well as  follows the mould surface.  By doing this, on the one hand, we can prevent the enterprise from being  hard to  eliminate the pellets  as a result of the hardening of the pellets  because of the  lasting storage of the students. On the other hand,  since the sawdust has water absorption, if the sawdust  externally is not removed, it may  increase the  advancement of the  deterioration of the  mold and mildew  surface area.

③ The mold should be  saved in a dry  as well as ventilated  area

 The majority of the molds of the  timber pelletizer  equipment are made of alloy steel. If they are in a  damp  area for a  very long time, the  surface area of the  mold and mildew may be  harmed  as a result of air corrosion,  therefore greatly  minimizing its service life.

④ The handling  procedure should  beware

The mold of the wood pelletizer machine  is a high-precision part,  as well as the mold hole is carefully  refined according to the compression  proportion of the  mold and mildew. If you are careless during the  dealing with  procedure, the structure of the inner  wall surface of the mold hole is  harmed, which may  cause molding during processing. low rate  and also short service life.

The above are the  suggestions on how to make the  mold and mildew life  much longer for wood pelletizer machine  Adhere to these  5  approaches to maintain the mold,  and also I believe your mold will last longer.

Related post: RICHI pelletizer machine 

( 2) Why do the pellets produced by the  timber pellets  maker have a  poor  look?

Why do the pellets  created by the wood pellet mill  equipment look bad? Today we  will certainly find out why.  Throughout the  manufacturing of wood pellet  gas by the wood pellet  manufacturing  device, there will be a  circumstance where the pellets  consist of powder  as well as have a rough surface.  Currently, it is  additionally  required to  inspect the equipment data  setups of the  timber pelletizer  maker. Besides, what is the  factor for this  sensation?

Wood pellets  create  even more wood pellet powders, this feedstock can be  triggered by  reduced moisture  material, the  dampness content of  timber pellet  maker feed is  generally between 12% and ~ 15%. After adjusting the  dampness content of the raw material, the  issue still exists, that is, the  stress roller die is seriously  used. When the inner  surface area of the ring die of the wood pelletizer  device is  seriously  put on or the particle diameter  requires to be  altered, it  requires to be  changed. The surface of the sawdust pellets is rough, which may be  triggered by the excessive moisture  material of the raw material, or the initial  use the mold. This  trouble can be solved by  readjusting the  dampness  material of the raw material, or by repeatedly grinding the mold with the  product.

To sum up, the  reasons that the pellets  created by the wood pelletizing machine are  bad in  look are  discussed today. I  wish it  will certainly  aid you when you use the wood pellet  device again.  Throughout the years, Richi Machinery  has actually  concentrated on the  r & d  as well as  manufacturing of  timber pelletizer  maker  equipments, biomass pellet  equipments, sawdust pellet  equipments,  gas pellet  makers, wood  handling  devices,  drying out  devices,  cooling down  devices  as well as packaging  devices.

Related post: Germany 2-2.5T/H Wood Pellet Plant 

( 3) Recommended  timber pellet  equipment.

There are many wood pellet mill  maker on  the marketplace. Today, Richi  Equipment  will certainly recommend  a few of them:

① The  initial type of  little wood pelletizer  device

It is a  brand-new  kind of biomass  power machinery  individually developed by our  firm's technical staff and has independent  copyright rights. The  timber pelletizer machine is  straightforward in  framework, easy to  run, stable in operation, and can  function  continually.  Journalism pellets have the advantages of high  thickness, high  burning  worth, low  wetness  as well as low ash  web content. The wood pellet  maker machine gearbox  takes on high-precision gear transmission,  4  collections of  equipments are  linked,  and also the hydraulic oil  distribution system can  immediately circulate oil  in between the  transmission and the  major shaft bearing. The  life span of the main shaft  and also  transmission  equipments.

The working parts of the  timber pelletizer machine die plate,  stress roller) are  made from alloy steel, and the  solidity after  warm treatment can reach  greater than 50, which  makes certain the  continual operation of the  maker  as well as  lengthens the  life span of  the entire wood pelletizer  device The  digital control system of the  primary engine  embraces the international  typical  arrangement of star-delta starting,  as well as the operation is  exceptionally  steady.

More details: Richi Machinery 

② The second type of  tiny wood pelletizer  equipment.

 Generally  ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds  as well as  various other crop stalks  and also factory wastes. It is suitable for low  temperature level granulation of biological  microbial fertilizer,  natural fertilizer  and also compound fertilizer.

 Attributes of this wood pelletizer  equipment:

① The pressure rollers are  equally  dispersed,  as well as the operation is stable. At the same time,  journalism area is  raised,  as well as the production  performance is  boosted.

② The screw center  stress  controling  framework is  embraced, and the wood pelletizer  device  mold and mildew  void can be large or  tiny, which  appropriates for  various  products to  make sure the pressing  impact.

③ This  version is  geared up with Φ6-Φ10mm diameter  mold and mildews, which are suitable for granulation of  various  products  as well as  accomplish  the very best  advantage.

More details： https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html