Ways to choose a drifting fish feed device Inm
Ways to choose a drifting fish feed device
In the last few years, with the rapid development of the economic situation, the floating fish feed device has actually followed closely, as well as the fish feed pellet maker has been searched for by every person. Then there is a problem, that is, just how to choose the floating fish feed machine Let's assess the three approaches of choosing a fish feed pellet maker.
More details: https://www.pellet-richi.com/fish-feed-extruder/floating-fish-feed-machine.html
1. Approaches to select a drifting fish feed equipment.
( 1) Look top quality.
The spray paint on the surface of the covering of the floating fish feed equipment ought to be uniform and firm, as well as there must be no paint leak, drooping as well as diminishing. The chrome-plated parts must be firm and vibrantly polished, free from peeling off and also corrosion. Stainless-steel parts need to have a smooth surface area, no bumps, and must be refined with neat refined patterns.
( 2) Setting up and also attachment
Along with examining the attachment of the body and the framework, the motor (or diesel engine) as well as the chassis, the floating fish feed equipment mostly inspects the setting up quality of the design template securing nut and the pellet cutter, and also the ring die floating fish feed equipment primarily checks Whether the securing bolts of the theme are tightened. And inspect the tightness of the pinch roller brace as well as pinch roller.
( 3) Readjust the gap in between the die and also the pressure roller wall surface.
Two layers of paper are packed in between the stress roller as well as the inner wall of the ring die, and it can be pulled out with a little force. After adjustment, be sure to tighten the changing nut in time and also install the protective cover.
After confirming that there are no foreign objects in the shield and also the ring die, turn the ring pass away by hand. At this time, the driven spindle ought to revolve quickly, and there is no sticking phenomenon or rubbing noise.
Related post: fish feed plant
2. Notes:
- Directly observe whether there is pounding of the drifting fish feed machine ring pass away during turning as well as whether it will scrub versus various other parts. Open up the monitoring port for feeding the powder right into the twisting cage and also examine whether there is any type of contaminant in the twisting cage.
- Turn the cage shaft by hand, the cage shaft should turn efficiently and there is no rubbing noise. Repetitively open and also shut the ring-molded warehouse door to check whether it is simple to open up and close as well as securely closed.
- Particular focus needs to be paid to inspecting the tightness of the joint and the dependability of the securing. The general needs are: exact positioning, strong securing, and also no leakage of powder.
- After securing the press chamber door, observe the seam seal of the chamber door from the side. If there is a location where the seal is not limited, the taking care of bolts of the door joint of the stockroom can be adjusted to effectively stop the leakage of powder.
3. Intro of floating fish feed device
- The floating feed extruder maker is a feed handling equipment that directly presses pellets from crushed materials such as corn, soybean dish, straw, yard, rice husk, etc( 1) Category of drifting fish feed pellet device
- floating fish feed machine can be separated into ring pass away pellet machine, ring pass away pellet maker and also counter-roll pellet machine; according to manufacturing, it can be separated right into: straw feed pellet maker, wheat bran feed pellet equipment, soybean dish feed pellet machine, corn straw feed pellet maker, Sawdust feed pellet machine, etc.
- A selection of various drifting fish feed machines are classified according to their appearance and production techniques.
( 2) Main efficiency characteristics of drifting fish feed machine
- Double shaft differential stainless steel conditioner, up to 12 factors of steam as well as 6 points of fluid addition;
- Combined spindle, easy to maintain and repair the bearing real estate;
- The screw and the primary shaft are connected by involute splines, which are very easy to change and change;
- The barrel is embedded with a wear-resistant bushing and also is furnished with a return water network, which can be heated/cooled, and also can also directly inject heavy steam or cold water right into the barrel;
- Spiral made from unique wear-resistant material, large element proportion can make certain continuous and also secure production of sinking/floating feed of numerous pellet sizes;
- Hassle-free as well as quick die substitute system and online flexible cutting tool;
- Specifically suitable for the production of 2 ~ 6mm drifting pellets.
Related post: Shrimp Feed Pellet Machine
After the product is squeezed out by the floating fish feed maker, it will develop soft and also soft pellets (the dampness web content is 25%~ 30%). Currently, it is far better to make use of pneumatic sharing instead of lift.
Since making use of lifts can quickly trigger the pellets to be damaged and also boost the pulverization price; the use of pneumatically-driven communicating can not just promptly create a layer of colloidal layer externally of the pellets to reduce the fragmentation of the pellets, however additionally round the shape of the pellets.
Because of its high wetness web content, the material communicated by pneumatic must get in the clothes dryer for drying out, to make sure that the dampness content of the material is decreased to about 13%.
I really hope the above associated content regarding floating fish feed device is practical to you. For additional information concerning drifting fish feed pellets equipment, you rate to consult the team of Richi Machinery, we will certainly serve you totally!
For details please contact:
WhatsApp:86 138 3838 9622
Email:enquiry@pellet-richi.com