Washington, DC -- The Occupational Safety and Health Administration (OSHA) has issued a Hazard Alert for hair smoothing products that could release formaldehyde. Concern surfaced when a stylist reported having nosebleeds, eye irritation, and trouble breathing while using hair smoothing products which are labeled “formaldehyde-free.” Difficulty breathing, nosebleeds, and eye irritation are the symptoms being reported by hairdressers across the country after giving clients hair smoothing. The popular hair treatments has had incredible success in the past couple years, promising straight and manageable hair for up to twelve weeks.
According to OSHA, Federal OSHA and State OSHA programs are investigating complaints from stylists and hair salon owners about exposure to formaldehyde while using GIB LLC dba (doing business as) Brazilian Blowout products and other hair smoothing products. OSHA has found formaldehyde in the air when stylists use hair smoothing products. Some had "formaldehyde-free" on the label or did not list formaldehyde on the product label or in the Material Safety Data Sheet (MSDS).
What is formaldehyde and how can it affect my health?
Formaldehyde is a colorless, strong-smelling gas that presents a health hazard if workers are exposed. You can be exposed to formaldehyde if you breathe it into your lungs, if it gets into your eyes, or if it is contained in a product that gets onto your skin. You can also be exposed accidentally if you touch your face, eat food, or drink after using a product containing formaldehyde without first washing your hands. It can irritate the eyes and nose, and cause coughing and wheezing. Formaldehyde is a "sensitizer," which means that it can cause allergic reactions of the skin, eyes, and lungs such as asthma-like breathing problems and skin rashes and itching. When formaldehyde is in a product that gets sprayed into the eyes, it can damage the eyes and cause blindness.
An inexpensive screening device to monitor for formaldehyde in the workplace is the Formaldehyde Screen Check (FCS) manufactured by Building Health Check and available Grainger’s, Sears, Carrier/Bryant dealers, on-line dealers or at www.indoorairtest.com or call 1-800-422-78783 ext. 404.
Building Health Check sets the industry standard for IAQ DIY kits, testing equipment, and laboratory analysis. For more information on Building Health Check, LLC contact us at ext. 404 or 804 or visit http://www.indoorairtest.com
About our Affiliate Laboratory, EDLab
The Environmental Diagnostics Laboratory (EDLab) (established in 1992) at Pure Air Control Services (PACS) is an AIHA accredited environmental lab offering complete and comprehensive indoor environmental microbiology laboratory services. They include: microbiology, aerobiology, chemistry, allergen assays and microscopy designed to meet all your indoor air needs. EDLab supports IAQ investigations by assisting with strategic sampling plan development and supplying media collection equipment while performing a wide range of environmental analyses. Contact EDLab at www.EDLab.org or toll free 1-800-422-7873 ext 301.
This annual event provides an opportunity for licensed contractors throughout the State of Florida to obtain all 14 state-required hours of continuing education over the course of the two-day event.
Released On: 3/8/2014
Although this type of bacteria was around before1976, more illness from Legionnaires' disease is being detected now. Due to consumer awareness, added research and technological advances in healthcare Legionnaires disease identification is becomi ...
Released On: 3/4/2014
Performance of a building depends on its structured integrity, preventive maintenance, as well as periodical monitoring of the environmental conditions essential for its functionality.
Released On: 2/19/2014
According to Building Operating Management magazine, expert Victor Yu, MD, Professor of Medicine, University of Pittsburgh; Chief, Infectious Disease Section, VA Medical Center, Pittsburgh, PA, disclosed that “Up to 70% of all buildings greater t ...
Released On: 2/18/2014
Released On: 1/22/2014
High efficiency coils are extremely susceptible to blockage from dust accumulation because once lodged deeply within the fins bacteria and mold may initiate growth, which not only compounds the blockage problems but also gives rise to excessive o ...
Released On: 1/8/2014
Exposure to radon is the second leading cause of lung cancer after smoking. Radon is an odorless, tasteless and invisible gas produced by the decay of naturally occurring uranium in soil and water.
Released On: 1/8/2014
World Health Organization (WHO Guidelines for Indoor Air Quality, 2009) concluded that the most important effect is increased prevalence of respiratory symptoms, allergies and asthma, as well as perturbation of the immunological systems
Released On: 12/31/2013
The website is a true indoor environmental resource for the private and public sector including consumers, educational facilities e.g. schools, universities, along with city, county state and federal governments, healthcare and the public sector.
Released On: 12/20/2013
“We are very proud to have been given the opportunity to display that we are a Doctor Trusted recipient. We will continue as always to help provide our customers with a great products and services,” stated Dr. Rajiv Sahay, environmental analytica ...
Released On: 12/11/2013
IndoorAirtest.com is very proud to have a Doctor Trusted seal of approval displayed on our website, giving our customers more confidence when shopping with us.
Released On: 12/4/2013
Released On: 10/2/2013
The assessment of allergens in a house dust sample is an essential step for allergen-avoidance and provides information essential for allergen-reducing measures, in addition to managing the indoor environment from a health and hygiene point of view
Released On: 9/18/2013
Healthcare-associated infections (HAIs) are infections that patients acquire during the course of receiving healthcare treatment for other conditions.
Released On: 7/31/2013
Released On: 7/17/2013
Released On: 7/11/2013
Some common and frequently reported microbes of the indoor environment include, but are not limited to, viruses, bacteria, mycoplasma, mold (fungi), yeast, protozoa, etc.
Released On: 6/26/2013
In indoor environments, this fungus can be transported from outside or may propagate on building materials such as cellulose rich sheet rocks, etc. and can generally be isolated from floors, carpets, mattress dust, Heating Ventilation Air Conditi ...
Released On: 6/19/2013