Tallahassee, FL -- Rising energy costs, lower maintenance budgets and decreased indoor air quality are challenges facing every facility manager across the country. But potential savings can be right under an organizations nose. Case in point: dirty or clogged commercial evaporator coils. Simply performing a deep cleansing with PURE-Steam coil Cleaning and Flushing can dramatically reduce energy costs, while improving in indoor air quality and with no chemicals.
Cooling coils use tubing arranged in a series of loops and fins and their purpose is to transfer heat from one fluid to another (e.g. water to air, refrigerants to air, air to air etc.). Aluminum and copper fins are attached to the coils to increase the exposure surface and the rate of heat transfer. In the 1970s and early 1980s the cooling coils had typically 8 to 12 fins per inch, but due to increasing energy costs and mandated energy efficiency ratings, it is not uncommon seeing coils today manufactured with 16 and 18 fins per inch arranged in complex zigzag patterns. Unfortunately, these high efficiency coils are extremely susceptible to blockage from dust accumulation because once lodged deeply within the fins bacteria and mold may initiate growth, which not only compounds the blockage problems but also gives rise to excessive operating costs, comfort control problems and unhealthy sanitary conditions that are not conducive to good air quality.
With energy costs rising, Florida State University (FSU), a major Florida university, took a close look at HVAC maintenance, including the total operating cost of its HVAC system. They found that the conventional coil cleaning foam/rinse method only superficially cleaned the surface of the coil and pushed small debris further into the coil causing decreased air flow, a musty odor, decreased temperature and humidity control and decreased the quality of the indoor air.
The forward thinking Facilities Management Department at Florida State University (FSU) felt these dirty coils were nothing but a pot of gold buried in dust and debris in these air handling systems. FSU discovered quickly that professionally steam cleaning their evaporator coils has paid huge dividends for them. They found a chemical free steam coil cleaning process so efficient and safe for the environment that in the first year of its implementation alone saved the university over $800,000 of their power bills and were able to provide the students and teachers a healthier learning environment. The estimated payback in less than eight (8) months was 157% return on investment (ROI).
Because dirty coils are difficult to clean, expensive to operate, unhealthy and can lead to humidity control deficiencies, it makes sense to minimize the amount of dust that can enter the airflow and to clean them before dirt accumulation becomes visible. Pure Air Control Services (PACS), an industry leader in environmental and mechanical cleaning technologies recommends not to defer coil cleaning to the point that dust accumulation is visible. Minimally, heat exchangers should be cleaned once a year using the superheated steam process. For non specialized environments (healthcare facilities, clean rooms, etc.), Pure Air Control Services also recommends using air filters with an equivalent Minimum Efficiency Rating Value (MERV) of 8 and to minimize the amount of air that could infiltrate in the air handler by ensuring that the filters fit snuggly in the holding racks and sealing all cabinet penetrations.
Charlotte County School District has implemented a "Green Cleaning" program to not only save energy but also to improve indoor air quality and mitigate long-term health risks and allergies associated with indoor air pollutants. This program introduces a chemical free coil cleaning process called PURE-Steam Coil Cleaning a safe and effective cleaning process used to save energy and create a healthy learning environment for students, school staff and visitors.
As a part of this initiative, the Charlotte County School District has contracted with Pure Air Control Services a national leading indoor environmental contractor with over 25 years of building IAQ experience. Because the PURE-Steam Coil Cleaning program is totally GREEN (NO CHEMICALS) students, school staff and visitors don’t have to worry about potential dangerous chemicals or Volatile Organic Compounds (VOC) entering into the air or water system.
Don Terry, Manager of HVAC Maintenance noted that “not only are we saving energy, but we are creating a healthy learning environment for our students and faculty.”
The U.S. Environmental Protection Agency (EPA) has long been a proponent of improving indoor air quality in the nation’s schools stating on their web site that “Poor indoor air quality (IAQ) can cause illness requiring absence from school, and can cause acute health symptoms that decrease performance while at school. In addition, recent data suggest that poor IAQ can reduce a person’s ability to perform specific mental tasks requiring concentration, calculation, or memory.” Indoor air quality (IAQ) is a critically important aspect of creating and maintaining quality school facilities.
Additionally, Mr. Terry stated that “your staff, crew and support team are great to work with. I would highly recommend your Pure-Steam Coil cleaning process to any facility/HVAC manager interested in saving energy, improving indoor air quality and creating a healthy school.”
To discuss ways to get your school district “chemical free” via the PURE-Steam coil cleaning process and save energy while creating a healthy learning environment call Pure Air Control Services today at 1-800-422-7873
About Pure Air Control Services:
Founded in 1984 by Alan Wozniak, President/CEO in what began as a small mechanical contracting business has grown into an award winning, industry leading indoor air quality (IAQ) service company serving many fortune 500 corporations, school boards, universities, county, city, state and federal governments and consumers across the US. The firm has serviced over 600 million square feet of indoor environments in over 10,000 facilities.
Pure Air Control Services nationally performed IAQ services include: Building Sciences Evaluation; Building Health Check; an AIHA accredited Environmental Microbiology Laboratory; Environmental Project Management; and Duct Cleaning & Mold Remediation Services, among other indoor environmental services. The company’s expanding client roster includes the General Services Administration (GSA); Federal Aviation Administration (FAA), Allstate Insurance; Carrier Air Conditioning; Naval Air Warfare Center, Orlando; and Naval Air Station - King's Bay, Georgia, and many other Fortune 500 companies, school boards, and city, state, and county governments, making Pure Air a reliable industry leader.
For more information, visit the company’s web site at www.pureaircontrols.com or contact Alan Wozniak or Cy Garner at 1-800-422-PURE ext 802 or 804 respectively.
This annual event provides an opportunity for licensed contractors throughout the State of Florida to obtain all 14 state-required hours of continuing education over the course of the two-day event.
Released On: 3/8/2014
Views: 4211
Although this type of bacteria was around before1976, more illness from Legionnaires' disease is being detected now. Due to consumer awareness, added research and technological advances in healthcare Legionnaires disease identification is becomi ...
Released On: 3/4/2014
Views: 4029
Performance of a building depends on its structured integrity, preventive maintenance, as well as periodical monitoring of the environmental conditions essential for its functionality.
Released On: 2/19/2014
Views: 4057
According to Building Operating Management magazine, expert Victor Yu, MD, Professor of Medicine, University of Pittsburgh; Chief, Infectious Disease Section, VA Medical Center, Pittsburgh, PA, disclosed that “Up to 70% of all buildings greater t ...
Released On: 2/18/2014
Views: 3620
Released On: 1/22/2014
Views: 3513
High efficiency coils are extremely susceptible to blockage from dust accumulation because once lodged deeply within the fins bacteria and mold may initiate growth, which not only compounds the blockage problems but also gives rise to excessive o ...
Released On: 1/8/2014
Views: 6290
Exposure to radon is the second leading cause of lung cancer after smoking. Radon is an odorless, tasteless and invisible gas produced by the decay of naturally occurring uranium in soil and water.
Released On: 1/8/2014
Views: 3961
World Health Organization (WHO Guidelines for Indoor Air Quality, 2009) concluded that the most important effect is increased prevalence of respiratory symptoms, allergies and asthma, as well as perturbation of the immunological systems
Released On: 12/31/2013
Views: 3986
The website is a true indoor environmental resource for the private and public sector including consumers, educational facilities e.g. schools, universities, along with city, county state and federal governments, healthcare and the public sector.
Released On: 12/20/2013
Views: 3023
“We are very proud to have been given the opportunity to display that we are a Doctor Trusted recipient. We will continue as always to help provide our customers with a great products and services,” stated Dr. Rajiv Sahay, environmental analytica ...
Released On: 12/11/2013
Views: 3954
IndoorAirtest.com is very proud to have a Doctor Trusted seal of approval displayed on our website, giving our customers more confidence when shopping with us.
Released On: 12/4/2013
Views: 4369
Released On: 10/2/2013
Views: 3306
The assessment of allergens in a house dust sample is an essential step for allergen-avoidance and provides information essential for allergen-reducing measures, in addition to managing the indoor environment from a health and hygiene point of view
Released On: 9/18/2013
Views: 5390
Healthcare-associated infections (HAIs) are infections that patients acquire during the course of receiving healthcare treatment for other conditions.
Released On: 7/31/2013
Views: 4428
Released On: 7/17/2013
Views: 4670
Released On: 7/11/2013
Views: 4739
Some common and frequently reported microbes of the indoor environment include, but are not limited to, viruses, bacteria, mycoplasma, mold (fungi), yeast, protozoa, etc.
Released On: 6/26/2013
Views: 5913
In indoor environments, this fungus can be transported from outside or may propagate on building materials such as cellulose rich sheet rocks, etc. and can generally be isolated from floors, carpets, mattress dust, Heating Ventilation Air Conditi ...
Released On: 6/19/2013
Views: 10473