Pellet Richi

Pellet Richi

Pellet machine manufacturer
https://www.pellet-richi.com/

Cause of Poultry Feed Pellet Making Maker m

Pellet Richi
Pellet Richi 2/20/2024 1:47:49 AM

Cause of Poultry Feed Pellet Making  Maker  Obstruction.

In the process of compound feed production, the  risk-free  and also  regular production of the  fowl feed pellet making  maker is  extremely  crucial,  since the poultry feed pelletizer completely completes the preparation of the  chicken feed pellet making  device. But in actual production,  as a result of  numerous  factors, it is easy to  create a thick  as well as  difficult material between the ring die  and also  journalism roller. The  stress roller can not  squeeze out the  product from the die  opening,  to ensure that the ring die of the poultry  device is stuck or slipped,  triggering the  usual  obstruction of the  fowl pellet mill.

 With on-site  evaluation of multi-equipment and multi-material, the reasons for  equipment blockage are as follows:.

1. The die roll  space is not  ideal.

The gap  in between the die rolls is  as well large,  causing an  exceedingly thick material layer between the die rolls,  unequal distribution,  irregular pressure roll  anxiety,  and also  very easy slippage.  As soon as the extrusion force of the die roller on the  product is less than the resistance of the  internal  wall surface of the die hole to the  product, the  product can not be extruded, which  will certainly cause  clog. In order to  minimize  blocking, attention  ought to be paid to  changing the  void between the die rolls during production.

When  changing, it is best to form a state of  nearness, rotation  as well as non-rotation of the  stress roller  and also the ring die. According to  monitoring, the  void is generally 3-5mm. In this  procedure, the experience  as well as  change feeling of the  chicken feed pellet making  maker are  extremely  vital.

Related post: chicken pellet making machine 

2. The  result of steam.

The most  suitable production  problems in the production  procedure of pellet feed are suitable  resources water,  excellent steam  top quality  as well as  adequate conditioning time.  Correct use of dry saturated steam granules can effectively  enhance the  result of the poultry feed pellet granulator and the  top quality of the granulated material. In order to  make sure good  bit quality  and also high  outcome, in addition to the  regular  procedure of each transmission part of the poultry feed  device, the  top quality of dry saturated steam  going into the conditioner of the poultry feed pellet making machine  ought to  additionally be guaranteed.

 Appropriate saturated  heavy steam has softening  as well as lubricating effect in the granulation process, which can  boost productivity,  lower frictional heat energy, and  lengthen the  life span of ring die; it can  minimize power consumption  and also promote starch gelation. Fiber-to-fiber bonding; it can improve the  bit  creating rate,  minimize powder, make the  product  look smooth and  tidy, and improve product  competition.

The  low quality of the  heavy steam makes the  dampness of the  product  too expensive when it leaves the conditioner,  as well as when it enters the  fragment  tooth cavity, it is easy to cause  obstruction of the die  opening,  and also the pressure roller slips,  creating  clog.

Related post: https://www.pellet-richi.com/feed-pellet-machine/chicken-feed-making-machine.html 

 Especially:.

①  Inadequate  heavy steam  stress  as well as high water  web content can  quickly  create the material to  soak up  excessive water. At the same time, when the  stress is  reduced, the temperature of the material is  additionally  reduced  throughout conditioning, the starch can not be gelatinized well,  and also the granulation effect is poor;.

② The  vapor  stress is  unpredictable,  varying high and low,  as well as the material conditioning is unstable,  leading to  big fluctuations in the current of the poultry feed making machine,  unequal thirst of the material, and easy  obstruction in the normal  manufacturing process.

The  chicken feed pellet making machine should always  take notice of factors such as  vapor  stress, conditioner feed rate, etc, to  prevent  too much  dampness in  product conditioning  triggered by  vapor  stress  and also water content. At the same time, in order to  decrease the  variety of  clogs caused by  vapor quality, the boiler room  need to  give  top quality,  secure dry saturated  vapor. In the  manufacturing process, the  chicken feed granulator  need to  constantly  take note of the moisture  material of the quenched  as well as tempered material, which can be judged by a  straightforward  approach. The  certain method is:  get hold of the  product of the conditioner, hold it by hand,  as well as  launch it.

Related post: poultry feed processing plant 

3. The influence of conditioning  result.

In order to make pellet feed  satisfy the competitive demands of  the marketplace, its excellent  top quality  needs to be  assured. The conditioning  impact of the material before granulation is  extremely  crucial, because it  straight  influences the output  and also  top quality of the  fowl feed pellet making  maker, especially the water stability of special aquatic products is an  crucial  sign.

If the material can not be completely conditioned  as well as  grown  prior to granulation, it is  challenging to  assure the water stability index. The so-called conditioning  describes the pretreatment of powder  products before granulation, which is the process of  totally  mixing  and also  soaking up the powder to be granulated and an appropriate amount of  vapor in the conditioner.

Select the conditioning equipment that  satisfies the  technological  demands,  to ensure that the material can be  totally stirred and  combined with  heavy steam in the conditioner to  attain the  result of softening the material  as well as gelatinizing starch, which is conducive to the compression molding of powder  and also  generates qualified  items. click over here now 

The poultry feed pellet making machine conditioner  calls for a  extended period of heat  conservation, heating  as well as humidification, and the number of layers can be  set up in  any type of  mix as  needed to  guarantee that the  product can  completely  satisfy the requirements of conditioning, improve the  surface area and  inner  top quality of the granular  product, and improve its water resistance in water. At present,  one of the most  optimal conditioning  impact can be  accomplished  by utilizing the  approach of Modulator+ Qualifier+ Modulator.

Through on-site debugging, the number of  obstructions of the poultry feed pellet making  equipment can be  decreased by adjusting the  vapor. As the boiler equipment  has actually been  developed, the  vapor  offered  has actually been  identified.  Focus on the  therapy  technique of water vapor in the  heavy steam  pipe,  attempt to exclude the condensed water in the steam  pipe, and the  vapor pressure at the front end of the conditioner  ought to be very stable.

For details please contact: 

pellet machine supplier 

WhatsApp:86 138 3838 9622

Email:enquiry@pellet-richi.com

Pellet Richi
Written by

Pellet Richi

Pellet machine manufacturer

Post a comment